<title> <META NAME="description" CONTENT="JBS Instruments specializes in stream flow measurement devices like the AquaCalc that are used in the field of hydrology."> <META NAME="keywords" CONTENT="jbs instruments aquacalc aquacount stream flow measurement water discharge current meter hydrology usgs"> </title>
AquaCalc Pro Plus Batteries
[Home] [Instruments] [Products] [AquaCalc Pro Plus] [Pro Plus Batteries]

AquaCalc Pro Plus Battery LifeAquaCalc Pro Plus Rear View wiht Batterie and USB

The four AA size Nickel Metal Hydride (NiMh) batteries in the AquaCalc Pro Plus (APP) are sized so that you can get more than one full day of work out of the unit. Battery life on the AquaCalc Pro Plus is about 10 hours under normal conditions using the supplied 1900 milliAmp-hour (mAh) Nickel Metal Hydride (NiMh) rechargeable batteries.  Using the USB connection to charge these batteries in the AquaCalc takes about ten hours. We recommend that you carry spare batteries into the field.

The AquaCalc Pro Plus can use AA alkaline batteries, just don’t’ charge them.

There is a sticker in the battery compartment of the AquaCalc Pro Plus (APP) that says something like “NiMh Batteries Only”. We were a little too aggressive with the warning about using alkaline batteries. The AquaCalc Pro Plus can take over-the-counter alkaline batteries, just like the old AquaCalc Pro. But, alkaline batteries should not be charged. If you leave them in accidentally, and plug the unit in to download, they will eventually grow hot and leak, damaging the APP.

Disabling the battery charging circuit

If you no longer wish to charge the NiMh batteries in the APP to avoid the possibility of damaging the APP with leaky alkaline batteries, you can disable the charging circuit in the APP:

  1. Open the battery compartment and remove the batteries
  2. Remove the warning sticker in the battery compartment. Underneath this sticker is a hole with a black “jumper” in it.
  3. Remove the jumper, the AquaCalc Pro Plus will no longer charge batteries.

You can use bigger batteriesEnerloopXX_

The batteries shipped with the AquaCalc Pro Plus are Nickel Metal Hydride rechargeable batteries with 1900 mAh capacity. You can purchase NiMh batteries with greater capacity than those we provided. Sanyo makes a “Enerloop XX” NiMh AA battery that has a capacity of 2500 mAh versus the 1900 mAh that we ship as standard. The existing batteries take about ten hours to fully charge in the APP, these larger ones will take longer. You can purchase these batteries from JBS Instruments, or Amazon:

http://www.amazon.com/eneloop-Capacity-Pre-Charged-Rechargeable -Batteries/dp/B008LTJJJA/ref=sr_1_1?ie=UTF8&qid=1395336921&sr=8-1&keywords=eneloop+xx

Cold Weather and Batteries

As you know, cold changes everything when it comes to equipment, especially batteries. While the APP hardware is designed to work down to about five degrees F, the batteries don’t.

Carry warm spare batteries

The biggest problem with batteries in the cold is that the chemical processes in the batteries stop when they get cold enough. Carrying warm spares in your pocket can help when the batteries in the APP get too cold to work. The APP uses standard rechargeable  NiMh AA batteries, any brand should work. We like the Sanyo Enerloop brand because they have a lower “self-discharge” rate, meaning that they won’t lose as much capacity when they just sit around. Some cheaper brands lose capacity as they sit. Keep spares warm.

Use an external battery pack in your pocket

One of the advantages of the AquaCalc Pro Plus’s USB port, is that it can be powered through this port. This means that you can add an external battery pack to the APP, and keep the battery pack in your pocket, connected to the APP via a USB cable. The batteries stay warm.

One of our customers near Mt- Shasta has been testing this for us and is pleased with the result, he reports that it is best if you remove the batteries from the APP, so that when they get cold they don't drag down the warm batteries in your pocket. So far we have tested two types, both work. One uses your spare AA NiMh batteries and can charge them, the other uses a built-in Lithium Ion battery and has more capacity. These can be purchased from JBS Instruments, or Amazon:

ankerpowerLithium External Batteries

http://www.amazon.com/Portable-External-Technology-Smartphones -lightning/dp/B00EF1OGOG/ref=sr_1_3?ie=UTF8&qid=1395338462&sr=8-3&keywords=anker+battery

 

 

 

tekchargeExternal Battery Power and Charger using AA NiMh batteries

http://www.amazon.com/Tekkeon-MP1580-TEKCHARGE-Battery -Charger/dp/B006FXUS1C/ref=sr_1_1?ie=UTF8&qid=1395338542&sr=8-1&keywords=tekcharge+battery

We would be interested in you results when testing these.

AquaCalc LLC. West Coast Office - 311 D Street West Sacramento, CA 95605
phone (916) 372-0534 fax (916) 372-1624 E-mail: sales@aquacalc.com

[Home] [Instruments] [Energy] [Support] [Contact Us] [Search]